0-10V dimming

0-10v dimming is a kind of analog signal dimming. Through the 0-10V voltage change, the output current of the power supply is changed to adjust the light. For example: when the 0-10V dimmer is modulated to 0V, the current drops to 0, the light is The brightness is also turned off (acting as a switch at this time). When the 0-10V dimmer is adjusted to a maximum of 10V, the output current will reach 100% of the power output, and the brightness will also be 100%. (The output voltage remains unchanged. ).

1-10V dimming

Principle of 1-10V dimming: only the dimmer is 1-10V: when the resistance dimmer is adjusted to 1V, the current that changes the output is also 10%. When it is adjusted to the maximum 10V, the output current will also reach the power output 100%, the brightness will also be 100%. (The output voltage is unchanged). Remarks: 1-10V does not have a switch function, and the lamp cannot be adjusted to a low switch off function!

Yanshuoda 5 in 1 dimming power supply has 5 kinds of dimming functions, including triac dimming, 0-10V dimming, 1-10V dimming, 10V PWM dimming, Resistors dimming, etc. It supports 100-277V dimming, Our dimming products are widely matched with the dimmers and lighting control systems of major brands in Europe, Australia and America, such as: Philips, Qisheng, Lutron, Leviton, ABB, Crestron, etc.; front and rear dimming The device has super compatibility, and the dimming is smooth and flicker-free.